The beginning of the path and the
Posted: Sun Dec 22, 2024 8:33 am
In the era of digitalization and active implementation of BIM technologies, the choice of software is becoming one of the key factors in the work of designers. At the same time, each of them has a unique experience and set of skills in working with different software, which causes a number of difficulties.
Thus, in the field of civil construction of area objects, many retrained from Revit tools. In this article, we will tell telegram in philippines about Tatyana Motorina's experience in switching from Bentley Systems products to nanoCAD BIM VK, which she shared as part of the BIM breakfast.
to information modeling
The specialist took her first steps in designing the VK section using AutoCAD, which, as is known, has all the basic tools for creating drawings. After 10 years, she moved to the team of BIM specialists of a large design institute, Gipronickel Institute LLC, and began to study Bentley Systems. The product ecosystem is based on the MicroStation platform and includes many different modules covering almost all stages of design, including the creation of consolidated models and the release of drawings.
Despite strong enthusiasm and a desire to enter a new professional field, the transition to BIM technologies was not easy for Tatyana Motorina due to her long-term work with a 2D solution:
"I faced challenges at every level of the design. It was hard, but I tried," she said, highlighting the following key issues:
Setting up the interface and parameters
The need to adapt the software to Russian GOSTs and the institute’s internal standards created a significant burden: setting up the display of drawings, working out line thicknesses and model parameters took a lot of time and effort.
Interface in English
Due to the foreign-language names of all the tools, buttons and windows, the execution of tasks was slow. It was possible to switch to Russian, but its use was accompanied by errors and failures, which forced the choice of the original version.
Thus, in the field of civil construction of area objects, many retrained from Revit tools. In this article, we will tell telegram in philippines about Tatyana Motorina's experience in switching from Bentley Systems products to nanoCAD BIM VK, which she shared as part of the BIM breakfast.
to information modeling
The specialist took her first steps in designing the VK section using AutoCAD, which, as is known, has all the basic tools for creating drawings. After 10 years, she moved to the team of BIM specialists of a large design institute, Gipronickel Institute LLC, and began to study Bentley Systems. The product ecosystem is based on the MicroStation platform and includes many different modules covering almost all stages of design, including the creation of consolidated models and the release of drawings.
Despite strong enthusiasm and a desire to enter a new professional field, the transition to BIM technologies was not easy for Tatyana Motorina due to her long-term work with a 2D solution:
"I faced challenges at every level of the design. It was hard, but I tried," she said, highlighting the following key issues:
Setting up the interface and parameters
The need to adapt the software to Russian GOSTs and the institute’s internal standards created a significant burden: setting up the display of drawings, working out line thicknesses and model parameters took a lot of time and effort.
Interface in English
Due to the foreign-language names of all the tools, buttons and windows, the execution of tasks was slow. It was possible to switch to Russian, but its use was accompanied by errors and failures, which forced the choice of the original version.