Dedicated technical support chat with TBS
Posted: Sun Dec 22, 2024 9:37 am
Access to training courses on the TBS platform with the ability to provide feedback on the material viewed. Thanks to this, TBS specialists also have the opportunity to improve their level of competence
Unique plug-in for designing VPP
The project itself, where CADLib was tested in conjunction with the integrated Model Studio CS and Revit system, consisted of creating an information model of the airport terminal in Blagoveshchensk. Egor Sidelnikov showed some elements of the resulting development, noting the possibilities of studying it from the inside from all possible angles, as well as creating everything necessary: from the structural part of the building to utility networks.
Case #2. BIM solutions nanoCAD in civil design
Despite the fact that more than one report has already been made about the Samolet Group project to build the korea phone number Gorki Park residential complex, Yegor Sidelnikov admitted that he could not help but cover it once again.
It can be called truly bold because, unlike some other developers, Samolet chose a completely new project to switch to domestic solutions: a 3-section residential building with a building area of 3945.85 m2 .
In just four months, a team of 5 specialists from TBS and 44 specialists from Samolet Group managed to test the functionality of domestic software, evaluate its suitability for forming sections of the CR and IOS, determine the complexity of forming libraries, automate a number of processes, etc. It was also especially important to integrate the tested nanoCAD , CADLib and Revit with the internal services of Samolet Group.
As a result, libraries of necessary components were created, a three-dimensional model was developed with subsequent testing for high-priority collisions, documentation sets were obtained, etc. In particular, a three-way communication channel was organized with representatives of the nanoCAD developer, who were open to comments and suggestions and ready to implement them as they were received.
“The most important thing I would like to emphasize is that domestic software is a really good starting option for those who have not yet switched to BIM,” concluded Yegor Sidelnikov.
Case No. 3. Ensuring technological independence in design and modeling
The survey of business processes of PJSC ALROSA became one of the largest projects for TBS. The project objectives included minimizing sanctions risks during the development and release of design and estimate documentation through the transition to domestic CAD systems, as well as implementing the Ministry of Digital Development's directives on import substitution.
As a result, the project was implemented in 2 stages:
Survey
At the first stage, TBS specialists organized interviews and surveys of employees of PJSC ALROSA, conducted a technical analysis of the systems used, and described the current top-level business processes.
Technical and working design
At the second stage, target schemes of top-level business processes were created using domestic software, and functional requirements for information systems, target integration architecture, technical architecture, data architecture, etc. were formed.
Then Egor Sidelnikov presented the results of the TBS analysis on the presence of functional analogues of foreign systems among domestic products: there is currently no equivalent replacement for Autodesk 3Ds Max, EPLAN and PLAXIS, existing solutions still need to be finalized. The expert also presented a scheme for the migration of the digital infrastructure of PJSC ALROSA: it was mainly decided to use Model Studio CS and nanoCAD products.
What's the bottom line?
In conclusion, it can be said that the transition to domestic software is not just a possible alternative, but also a real strategic decision for many companies. It is important to begin the transition process gradually, assessing the strengths and weaknesses of Russian software. The experience of TBS and their clients shows that it can successfully compete with foreign analogues and ensure high quality and functionality of projects.
Unique plug-in for designing VPP
The project itself, where CADLib was tested in conjunction with the integrated Model Studio CS and Revit system, consisted of creating an information model of the airport terminal in Blagoveshchensk. Egor Sidelnikov showed some elements of the resulting development, noting the possibilities of studying it from the inside from all possible angles, as well as creating everything necessary: from the structural part of the building to utility networks.
Case #2. BIM solutions nanoCAD in civil design
Despite the fact that more than one report has already been made about the Samolet Group project to build the korea phone number Gorki Park residential complex, Yegor Sidelnikov admitted that he could not help but cover it once again.
It can be called truly bold because, unlike some other developers, Samolet chose a completely new project to switch to domestic solutions: a 3-section residential building with a building area of 3945.85 m2 .
In just four months, a team of 5 specialists from TBS and 44 specialists from Samolet Group managed to test the functionality of domestic software, evaluate its suitability for forming sections of the CR and IOS, determine the complexity of forming libraries, automate a number of processes, etc. It was also especially important to integrate the tested nanoCAD , CADLib and Revit with the internal services of Samolet Group.
As a result, libraries of necessary components were created, a three-dimensional model was developed with subsequent testing for high-priority collisions, documentation sets were obtained, etc. In particular, a three-way communication channel was organized with representatives of the nanoCAD developer, who were open to comments and suggestions and ready to implement them as they were received.
“The most important thing I would like to emphasize is that domestic software is a really good starting option for those who have not yet switched to BIM,” concluded Yegor Sidelnikov.
Case No. 3. Ensuring technological independence in design and modeling
The survey of business processes of PJSC ALROSA became one of the largest projects for TBS. The project objectives included minimizing sanctions risks during the development and release of design and estimate documentation through the transition to domestic CAD systems, as well as implementing the Ministry of Digital Development's directives on import substitution.
As a result, the project was implemented in 2 stages:
Survey
At the first stage, TBS specialists organized interviews and surveys of employees of PJSC ALROSA, conducted a technical analysis of the systems used, and described the current top-level business processes.
Technical and working design
At the second stage, target schemes of top-level business processes were created using domestic software, and functional requirements for information systems, target integration architecture, technical architecture, data architecture, etc. were formed.
Then Egor Sidelnikov presented the results of the TBS analysis on the presence of functional analogues of foreign systems among domestic products: there is currently no equivalent replacement for Autodesk 3Ds Max, EPLAN and PLAXIS, existing solutions still need to be finalized. The expert also presented a scheme for the migration of the digital infrastructure of PJSC ALROSA: it was mainly decided to use Model Studio CS and nanoCAD products.
What's the bottom line?
In conclusion, it can be said that the transition to domestic software is not just a possible alternative, but also a real strategic decision for many companies. It is important to begin the transition process gradually, assessing the strengths and weaknesses of Russian software. The experience of TBS and their clients shows that it can successfully compete with foreign analogues and ensure high quality and functionality of projects.